home *** CD-ROM | disk | FTP | other *** search
-
-
-
-
-
-
- Server Setting:Network panel.
-
- is controlled by the preferences in the Advanced Mail
-
- DNS Cache settings and allowed DNS Request information
-
- connections will be attempted.
-
- outgoing mail will continue to expire, but no remote
-
- puts all outgoing mail on hold. With this setting all
-
- Unchecking both MX-List Information and Primary DNS Entry
-
- attempt for all outgoing connections.
-
- (No Response Name Required)
-
- (Minimum 1 k)
-
- (Minimum 64 k)
-
- Could not disconnect user.
-
- Disconnected user successfully.
-
- Could not access user information.
-
- Disconnect
-
- Disconnect:
-
- Are you sure you want to disconnect this user?
-
- :
-
- .
-
- No items were found.
-
- Hrs:Min
-
- No.
-
- Type
-
- IP Address
-
- Connected User
-
- Click the user's name to disconnect the user.
-
- Connected Users
-
- Please start the Mail Server and try again.
-
-
-
-
-
- The Mail Server Settings General Panel information could not be updated.
-
- In the General section, the maximum size for Error Log is invalid. Please enter a valid number.
-
- In the General section, the maximum size for Server log is invalid. Please enter a valid number.
-
- In the Protocols section, the Notify Mail Port Number is invalid. Please enter a valid number.
-
- In the Protocols section, the FINGER Port Number is invalid. Please enter a valid number.
-
- In the Protocols section, the PASS Port Number is invalid. Please enter a valid number.
-
- In the Protocols section, the IMAP Port Number is invalid. Please enter a valid number.
-
- In the Protocols section, the POP3 Port Number is invalid. Please enter a valid number.
-
- In the Protocols section, the SMTP Out Port Number is invalid. Please enter a valid number.
-
- In the Protocols section, the SMTP In Port Number is invalid. Please enter a valid number.
-
- In the Network section, the number of seconds in the Network Timeout read/write is invalid. Please enter a valid number.
-
- In the Network section, the number of seconds in the Network Timeout open connection is invalid. Please enter a valid number.
-
- In the Network section, the number of minutes in the Cache DNS information is invalid. Please enter a valid number.
-
- In the Mail Out section, the number of hours to warn sender of non-delivery is invalid. Please enter a valid number.
-
- In the Mail Out section, the number of hours the message expired is invalid. Please enter a valid number.
-
- In the Mail In section, the maximum incoming message size is invalid. Please enter a valid number.
-
- (No Response Name for Notify Mail)
-
- Notify Mail
-
- (No Response Name for FINGER)
-
- FINGER
-
- Network read/write
-
- IMAP Administrator Access
-
- Your request could not be completed.
-
- The Network Host Settings is not available because the Mail server is not running.
-
- The Schedule Host Settings is not available because the Mail server is not running.
-
- The Mail Out Host Settings is not available because the Mail server is not running.
-
- The Mail In Host Settings is not available because the Mail server is not running.
-
- Advanced Mail Server options could not be updated.
-
- Advanced Mail Server options updated successfully.
-
- Mail server settings could not be updated.
-
- Mail server settings updated successfully.
-
- (No Response Name for PASS)
-
- PASS
-
- IMAP
-
- POP3
-
- Out
-
- In
-
- SMTP
-
- Port Number
-
- Response Name
-
- Enable
-
- seconds
-
- Open connection
-
- Network Timeout
-
- Use Advanced Mail Server Network Settings
-
- Request A-Record
-
- Request MX-List Information
-
- DNS Attribute Requests
-
- DNS information will be requested before every connection
-
- Always check DNS
-
- minutes
-
- Cache DNS informaton for
-
- Respect "Time To Live" (TTL) DNS Settings
-
- Cache DNS Results
-
- Protocols
-
- Network
-
- Messages on hold will not expire.
-
- No attempt will be made to connect to any mail host.
-
- Hold outgoing mail
-
- Relay all outgoing SMTP mail via:
-
- Warn Postmaster of non-delivery
-
- Warn sender of non-delivery after
-
- hours
-
- Messages expire after
-
- Allow outgoing mail
-
- Send blind carbon copies of all messages to:
-
- Blind Carbon Copies (BCC)
-
- Maximum message size is
-
- Message size
-
- Restart the Mail Server to apply changes.
-
- Maximum size for Error Log:
-
- Maximum size for Server Log:
-
- Log Files
-
- Volume Name:
-
- Mail Storage Volume
-
- k
-
- Preferred free disk space:
-
- 2048 k
-
- Suggested minimum free disk space:
-
- Disk Space
-
- Start AppleShare IP Mail Server at system startup
-
- Save
-
- Advanced Server Options
-
- Mail Out
-
- Mail In
-
- General
-
- Server Settings
-
- Require local from addresses to exist in Users & Groups
-
- Forward mail to:
-
- Forward mail addressed to unknown local users
-
- There is a time out errror since there is no response from Mail Server
-
- The Protocols Advanced Server Settings is not available because the Mail server is not running.
-
- The Network Advanced Server Settings is not available because the Mail server is not running.
-
- The Mail Out Server Settings is not available because the Mail server is not running.
-
- The Mail In Server Settings is not available because the Mail server is not running.
-
- Mail server could not be stopped.
-
- Mail server could not be started.
-
- The Mail Error Log file could not be read.
-
- The Mail Server Log file could not be read.
-
- The Mail Error Log file could not be displayed because of low memory.
-
- The Mail Server Log file could not be displayed because of low memory.
-
- The Mail Error Log is not available because of the Mail Error Log file does not exist.
-
- The Mail Server Log is not available because of the Mail Server Log file does not exist.
-
- The Mail Error Log is not available because of the Mail Server is not running.
-
- The Mail Server Log is not available because the Mail Server is not running.
-
- Stopped the Mail Server successfully.
-
- Started the Mail Server successfully.
-
- Reject Mail if destination is not in Host List
-
- New Mail Host
-
- Logs
-
- Mail Error Log
-
- End...
-
- Home...
-
- Next...
-
- Event
-
- Date Time
-
- Mail Server Log
-
- Not Running
-
- Mail Server Activity
-
- of
-
- Mail Storage Size:
-
- Mail Storage Volume:
-
- Number of Users Sending Mail:
-
- Number of Active Users:
-
- Number of Messages:
-
- Mail Server:
-
- Mail Activity
-
-